HP 4284A - Page 301

COrrection Subsystem
:SPOT < n > :OPEN
The :SPOT < n > :OPEN command executes the OPEN correction data
measurement for the sp ecied frequency point (FREQ1, FREQ2 or
FREQ3) correction.
Command Syntax
CORRection:SPOT < n > :OPEN
Where,
< n > is :
1 State setting for FREQ1 p oint
2 State setting for FREQ2 p oint
3 State setting for FREQ3 p oint
Example
OUTPUT 717;"CORR:SPOT1:OPEN"
:SPOT < n > :SHORt
The :SPOT < n > :SHORt command executes the SHORT correction
data measurement for the sp ecied frequency point (FREQ1, FREQ2
or FREQ3) correction.
Command Syntax
CORRection:SPOT< n >:SHORt
Where, < n > is:
1 State setting for FREQ1 p oint
2 State setting for FREQ2 p oint
3 State setting for FREQ3 p oint
Example
OUTPUT 717;"CORR:SPOT1:SHOR"
8-60 Command Reference