HP 4284A - Page 304

COrrection Subsystem
:USE
The :USE command sets the channel number to b e used for multi
channel correction. The :USE? query returns the current settings of
the channel selected.
Command Syntax
CORRection:USE < channel number >
Where, < channel number > is : 1 to 127 (NR1, NR2, or NR3) :
channel number
Example
OUTPUT 717;"CORR:USE 10" ! Set to channel number 10
Query Syntax
CORRection:USE?
Query Response
Returned format is :
< channel number > <NL^END>
Example
10 OUTPUT 717;"CORR:USE?"
20 ENTER 717;A
30 PRINT A
40 END
Command Reference 8-63