HP 4284A - Page 311

COMParator Subsystem
:SEQuence:BIN
The :SEQuence:BIN command sets the low/high limit values of the
BINs for the sequence mo de of the comparator function. These
limits can be set only when the limit mo de is set to the sequence
mo de. The :SEQuence:BIN query returns the current settings of the
low/high limit values of the BINs.
Command Syntax
COMParator:SEQuence:BIN < BIN1 low limit > , < BIN1 high
limit > , < BIN2 high limit > , ... , < BINn high limit >
Where,
< BIN1 low limit > NR1, NR2, or NR3 format : low limit value for
BIN1
< BIN1 high limit > NR1, NR2, or NR3 format : high limit value
for BIN1
< BINn high limit > NR1, NR2, or NR3 format : high limit value
for BINn (n : max. 9 )
Note
The low limit value should b e lower than the high limit value.
Example
OUTPUT 717;"COMP:SEQ:BIN 10,20,30,40,50"
Query Syntax
COMParator:SEQuence:BIN?
Query Response
Returned Format is :
< BIN1 low limit > , < BIN1 high limit > , < BIN2 high limit > , ... ,
< BINn high limit > <NL^END>
Example
10 DIM A$[200]
20 OUTPUT 717;"COMP:SEQ:BIN?"
30 ENTER 717;A$
40 PRINT A$
50 END
8-70 Command Reference