information
(RoHS) directive – 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive – 2002/96/EC.
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver
level, see
www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 96.1% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Corrugated – 185 g
Corrugated Carton – 415 g
Internal:
Polyethylene low density – 22 g
Molded pulp – 100 g
The Corrugated carton packaging material is made from 80% recycled
content.
The Corrugated packaging material is made from 80% recycled content.
The Polyethylene low density packaging material is made from 80%
recycled content.
The Molded Pulp packaging material is made from 80% recycled
content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
HP 430 Notebook PC and HP 630 Notebook PC
Material Usage
This product does not contain any of the following substances in excess of
regulatory limits (for reference of these limits please refer to the HP General
Specification of the Environment
QuickSpecs
HP 430 Notebook PC
HP 630 Notebook PC
Technical Specifications
DA - 13963 Worldwide — Version 11 — July 23, 2012
Page 28
To Next Page
Loading...
