To Next Page

To Previous Page

Model 432A Regulatory Information

Warranty

This Hewlett-Packard product is warranted against defects in materials and workmanship for a

period of one year from date of shipment. During the warranty period, Hewlett-Packard

Company will, at its option, either repair or replace products which prove to be defective.

For warranty service or repair, this product must be returned to a service facility designated by

HP. Buyer shall prepay shipping charges to HP and HP shall pay shipping charges to return the

product to Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for products

returned to HP from another country.

HP warrants that its software and ﬁrmware designated by HP for use with an instrument will

execute its programming instructions when properly installed on that instrument. HP does not

warrant that the operation of the instrument, or software, or ﬁrmware will be uninterrupted or

error free.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from:

1 Improper or inadequate maintenance, adjustment, calibration, or operation by Buyer;

2 Buyer-supplied software, hardware, interfacing or consumables;

3 Unauthorized modiﬁcation or misuse;

4 Operation outside of the environmental and electrical speciﬁcations for the product;

5 Improper site preparation and maintenance; or

6 Customer induced contamination or leaks.

THE WARANTY SET FORTH IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER

WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. HP SPECIFICALLY DISCLAIMS THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

Limitation of Remedies and Liability

THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES.

IN NO EVENT SHALL HP BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFITS) WHETHER BASED ON

CONTRACT, TORT OR ANY OTHER LEGAL THEORY.

Responsibilities of the Customer

The customer shall provide:

1 Access to the products during the speciﬁed periods of coverage to perform maintenance.

2 Adequate working space around the products for servicing by Hewlett-Packard personnel.

3 Access to and use of all information and facilities determined necessary by Hewlett-Packard to

service and/or maintain the products. (Insofar as these items may contain proprietary or

classiﬁed information, the customer shall assume full responsibility for safeguarding and

protection from wrongful use.)

4 Routine operator maintenance and cleaning as speciﬁed in this manual.

5 Consumables such as paper, disks, magnetic tapes, ribbons, inks, pens, gases, solvents, lamps,

ﬁlters, fuses, seals, etc.

HP 432A User Manual

Questions and Answers: