Error Messages in Numerical Order
113
NO STATE/DATA FILES ON DISK
There are no les on the exible disk with extensions,\
_D
"or\
_S
" for LIF format, or \
STA
"or
\
.DTA
" for DOS format.
114
CAN'T SAVE GRAPHICS WHEN COPY IN PROGRESS
If you attempt to save graphics when a print is in progress, this error message is displayed.
115
LIF-DOS COPY NOT ALLOWED
If you try to copy a le between the memory disk and the exible disk when the format of the
memory disk is dierent from the format of the exible disk, this message is displayed.
116
NO STATE/DATA FILES ON MEMORY
There are no les on the memory disk with extensions,\
_D
"or\
_S
" for LIF format, or \
.STA
"
or \
.DTA
" for DOS format.
117
DUPLICATE FILE EXTENSION
The extension name entered is already used for other le types
. Use other extension name
.
119
NO DATA TRACE DISPLAYED
The
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SCALE FOR [DATA]
is selected when the data trace is not displayed.
120
NO MEMORY TRACE DISPLAYED
The
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SCALE FOR [MEMORY]
is selected when the memory trace is not displayed.
124
LIST TABLE EMPTY OR INSUFFICIENT TABLE
The frequency list is empty.To implement the list frequency mode, add segments to the list
table.
126
CAN'T CHANGE NUMBER OF POINTS
The number of points of the spectrum analyzer mode cannot be to change manually, except in
zero span.
127
CAN'T SET SWEEP TIME AUTO IN ZERO SPAN
The automatic sweep time cannot be in zero span of the spectrum analyzer mode
. (The
network analyzer mode allows that the automatic sweep time is turned on.)
128
SPAN = 0 ONLY
The setup must be zero span and spectrum analyzer mode when turning on the RF OUTPUT.
131
FREQUENCY SWEEP ONLY
The sweep type must be frequency sweep when the center step size is set.
Messages-19
To Next Page
Loading...
