Size
Dimensions
1
Weight
Capacity
2
JIS B5 182 x 257 mm
(7.17 x 10.12 inches)
Envelope Monarch #7-3/4 98 x 191 mm
(3.9 x 7.5 inches)
Envelope C5 ISO 162 x 229 mm
(6.4 x 9.0 inches)
Envelope DL ISO 110 x 220 mm
(4.3 x 8.7 inches)
Envelope B5 ISO 176 x 250 mm
(6.7 x 9.8 inches)
Custom Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 216 x 356 mm
(8.5 x 14 inches)
1
The printer supports a wide range of sizes. Check the printer software for supported sizes.
2
Capacity can vary depending on paper weight and thickness, as well as environmental conditions.
Media to avoid
This printer can handle many types of media. Use of media outside the printer’s specifications will
cause a loss of print quality and increase the chance of paper jams.
●
Do not use media that is too rough.
●
Do not use media with cutouts or perforations other than standard 3-hole punched paper.
●
Do not use multipart forms.
●
Do not use media that has already been printed on or that has been fed through a photocopier.
●
Do not use media with a watermark if you are printing solid patterns.
Media that can damage the printer
In rare circumstances, media can damage the printer. Avoid the following media to prevent possible
damage to the printer:
●
Do not use media with staples attached.
●
Do not use transparencies designed for inkjet printers or other low-temperature printers, or
transparencies designed for monochrome printing. Use only transparencies that are specified
for use with HP Color LaserJet printers.
●
Do not use glossy or photo media intended for inkjet printers.
●
Do not use media that is embossed or coated and is not designed for the temperatures of the
fuser. Select media that can tolerate temperatures of 195°C (383°F) for 0.1 second.
Table 1-9 Optional stapler/stacker supported sizes (for HP Color LaserJet 4700 only) (continued)
ENWW Media specifications 29
To Next Page
Loading...