HP 48G Series

One final example illustrates the ability of the HP 48 to factor the
unit expression.
[a
ia
Example: Factor HM (Newtons) out of Zi. 5_ka#m™
Step 1: Enter the unit object.
on 5) 1: 3.2 _kog¥m 2,572
Cop @(UnrTo) | ET NE TE
@0)
Step 2: Key in the unit to be factored, using i as its value.
@0)
|
FORE
|
3.5.kewn2/5"7
NJ OYN GF KIP LEFPOL
Step 3: Perform the unit factoring, using the Units Commands menu
(@UNTS)).
@ (UNITS) LFALT 1: 3. 3_N#m
[CONV [UERZE[ UVAL [UFACT]*UNIT] |
Arithmetic 3-15