HP 4X - DDR InfiniBand Mezzanine HCA Reference Guide

Server agents 114
Log Severity: Warning (2)
Event Title: Rack Power Subsystem Overload
Log Message: The rack power subsystem overload condition.
SNMP Trap: cpqRackPowerSubsystemOverloadCondition - 22020 in CPQRACK.MIB
Symptom: The rack power subsystem overload condition.
User Action: Replace any failed power supplies as soon as possible to return the system to a
redundant state.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackPowerEnclosureName
• cpqRackCommonEnclosureSparePartNumber
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “The power subsystem in enclosure
[cpqRackPowerEnclosureName] in rack [cpqRackName] is in an overload condition.”
NT Event ID: 1163 (Hex)0xc435048b (cpqsvmsg.dll)
Log Severity: Error (3)
Event Title: Server Power Shedding Shutdown
Log Message: Server shutdown due to power shedding.
SNMP Trap: cpqRackPowerShedAutoShutdown - 22021 in CPQRACK.MIB
Symptom: Server shutdown due to power shedding. The server blade was shut down due to a lack of
power.
User Action: Check power connections or add power supplies.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackServerBladeEnclosureName
• cpqRackServerBladePosition
• cpqRackServerBladeSparePartNumber
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “The server shutdown due to lack of power blade
[cpqRackServerBladePosition], in enclosure [cpqRackServerBladeEnclosureName], in rack
[cpqRackName].”
NT Event ID: 1164 (Hex)0xc435048c (cpqsvmsg.dll)

HP 4X - DDR InfiniBand Mezzanine HCA Specifications

General

Brand	HP
Model	4X - DDR InfiniBand Mezzanine HCA
Category	Server
Language	English