8 start guide
ENWW
Location requirements for the printer
•
A sturdy, level surface for
placement
•
Space allowance around the
printer, including 2.4 inches
(60 mm) of space on the left
side and 3.9 inches (100
mm) of space on the right
side for ventilation
•
A clean, well-ventilated
environment
•
No exposure to direct
sunlight or chemicals,
including ammonia-based
cleaning solutions
•
Adequate power supply (for
100-127 V models, at least
10.5 amps; for 220-240 V
models, at least 5.3 amps)
•
A stable environment—no
abrupt temperature or
humidity changes
•
Relative humidity 20% to
80%
•
Room temperature 50° to
91° F (15° to 32.5° C)
To Next Page
Loading...