HP 5100 - Page 146

B-10 Control Panel Menus ENWW
PCL FONT POINT
SIZE=12.00
4.00
to 999.75 This item might not appear, depending on
the font selected. Press [-Value+] once to
change setting by increments of .25 for
point size, or hold down [-Value+] to scroll
by increments of 1.
PCL SYMBOL
SET=PC-8
PC-8
many others
Select any one of several available symbol
sets from the printer’s control panel. A
symbol set is a unique grouping of all the
characters in a font. PC-8 or PC-850 is
recommended for line draw characters.
Order the PCL 5/PJL Technical Reference
Documentation CD for symbol set charts or
for more information (page 8).
COURIER=REGULAR REGULAR
DARK
Select the version of Courier font to use:
REGULAR: The internal Courier font
available on the HP LaserJet 4 series
printers.
DARK: The internal Courier font available
on the HP LaserJet III series printers.
Both fonts are not available at the same
time.
WIDE A4=NO NO
YES
The Wide A4 setting changes the number
of characters that can be printed on a single
line of A4 paper.
NO: Up to 78 10-pitch characters can be
printed on one line.
YES: Up to 80 10-pitch characters can be
printed on one line.
APPEND CR TO LF=
NO
NO
YES
Select YES to append a carriage return to
each line feed encountered in
backward-compatible PCL jobs (pure text,
no job control). Some environments, such
as UNIX, indicate a new line using only the
line feed control code. This option allows
the user to append the required carriage
return to each line feed.
PRINT PS
ERRORS=OFF
OFF
ON
Select ON to print the PS error page when
PS errors occur.
Printing Menu (Continued)
Item Values Explanation