66 Chapter 2: Printing Tasks ENWW
Deleting a Stored Job
When a user sends a stored job, the printer overwrites any previous
jobs with the same name. Jobs stored on the printer’s optional hard
disk can be deleted from the control panel.
1 Press [Menu] repeatedly until PRIVATE/STORED JOBS MENU
appears.
2 Press [Item] until your user name appears.
3 Press [-Value+] until the desired job name appears.
4 (Follow this step only if printing a private job.) Press [Select] to
select the job. PIN:0000 appears.
5 (Follow this step only if printing a private job.) Press [-Value+] to
change the first number of the PIN, and then press [Select]. An
* appears in place of the number. Repeat these steps to change
the remaining three numbers of the PIN. COPIES=1 appears.
6 Press [-Value+] until DELETE appears.
Note Press [Select] to delete the job.
To Next Page
Loading...