80 Chapter 4: Problem Solving ENWW
Clearing Jams from the Optional Duplexer
Look for jams in the following locations:
The Tray 2 area:
1 Slide Tray 2 out of the printer.
2 Slowly pull any paper out of the
printer.
The front cover of the duplexer:
3 From the front of the printer, grasp
the front cover of the duplexer (use
the grip in the center), pull it straight
toward you, and then lift it up to
remove.
4 Slowly pull any paper out of the
printer.
5 Replace the duplexer’s front cover,
and replace Tray 2.
Continued on the next page.
To Next Page
Loading...