To load envelopes in tray 1
Many types of envelopes can be printed from tray 1. Up to 10 can be stacked in the tray.
1. Open tray 1 and pull out the tray extension. If the envelopes are longer than 229 mm (9 in), flip
open the smaller tray extension.
2. Open the rear output bin and pull out the tray extension. (This can reduce envelope curl and
wrinkling.)
3. Slide the width guides on tray 1 outward to a position that is slightly wider than the envelopes.
60 Chapter 4 Printing tasks ENWW
To Next Page
Loading...