2-10
Installing the Series 5400zl Switches
Installation Procedures
Installing the Series 5400zl
Switches
■ If you do not use one or more of the slots, ensure the slot cover plate is
still attached over the slot for safe operation and proper switch cooling.
For safety, you should not have more than one module slot uncovered at
a time.
■ Although these procedures show the 6-slot chassis, the procedures are
the same for the 12-slot chassis.
Figure 2-1. Module Being Installed in a Chassis
Insert module into the guides and
slide it in until it is fully inserted.
Open extractor handles
To Next Page
Loading...
