Guidelines
Do not exceed the In tray capacity: 100 sheets of paper.
Preparing to print
1 Raise the Out tray.
2 Slide the paper guide all the way to the left.
3 Place plain paper in the In tray, pushing the paper into the printer until it stops.
4 Slide the paper guide firmly against the edge of the paper stack.
5 Lower the Out tray.
Printing
1 Open the Printer Properties dialog box.
2 Select the Printing Shortcuts tab, and then select Two-sided, duplex, printing in
the drop-down list.
3 In the Print on both sides drop-down list, select one of the following binding
options:
– Left edge booklet
– Right edge booklet
4 Select any other print settings that you want, and then click OK.
5 When prompted, reload the printed pages in the In tray as shown below.
6 Click Continue to finish printing the booklet.
Use the What’s This? help to learn about the features that appear in the Printer
Properties dialog box.
Posters
● Guidelines
User's Guide 37
To Next Page
Loading...