To prevent paper from falling out of the Out tray, fully pull out the Out-tray extension. If
you are printing in the FastDraft mode, unfold the Out-tray extension stop.
1 Out-tray extension
2 Out-tray extension stop
Fold the paper trays
Follow these steps to fold the paper trays:
1. Remove paper or other media from the paper trays.
2. If the Out-tray extension stop is raised, lower it and then push it into the Out-tray
extension.
3. Push the Out-tray extension into the Out tray.
User's guide 13
To Next Page
Loading...
