Need help?Do you have a question about the HP J2600A and is the answer not in the manual?
General| Device Type | Router |
|---|---|
| Form Factor | Rack-mountable |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet |
| RAM | 8 MB |
| WAN Ports Qty | 0 |
| Modular | No |
| Network Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Network / Transport Protocol | IP |
| Remote Management Protocol | SNMP, Telnet |
| Status Indicators | Port status, Power |
| Compliant Standards | IEEE 802.3 |
| Expansion Slots | Expansion Slot |
| Supported Protocols | TCP/IP |
| Routing Protocols | RIP |
| Management | SNMP |
| Dimensions (H x W x D) | 4.4 cm x 44 cm x 26.4 cm |
Step-by-step guide for physically installing the router module into the hub.
Instructions for connecting the WAN cable to the router module.
Procedure to confirm that the router module has started up correctly.
Guides on creating or modifying the router's network configuration.
Procedures to verify network link operational status and reachability.
Describes the status LEDs and buttons on the router module.
General advice and initial checks for resolving common issues.
Explains how to diagnose problems by observing LED status patterns.
Addresses issues occurring during power-on or reset self-tests.
Describes various tests to diagnose router module and network link problems.
To Next Page
