Need help?Do you have a question about the HP J9833A and is the answer not in the manual?
General| Product Number | J9833A |
|---|---|
| Device Type | Switch |
| Form Factor | Rack-mountable |
| Jumbo Frame Support | Yes |
| MAC Address Table Size | 16000 entries |
| Power Supply | Internal power supply |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
Details the front and back panels of the HP PS1810-8G and PS1810-24G switches.
Explains port types, including RJ-45, PoE PD, and SFP slots, and their capabilities.
Describes the function and meaning of various status LEDs on the switch panels.
Lists the key features and capabilities of the HP PS1810 Switches.
Provides essential safety and operational guidelines before installing the switch.
Specific rack/cabinet mounting for the 24G model.
Instructions for connecting network devices using RJ-45 or SFP ports.
Steps to power on the switch and check LEDs for successful self-test completion.
Recommended connections between the switch and HP ProLiant Gen8 Servers.
Steps to access the web interface and perform initial setup of the switch.
Common problems and their solutions for the HP PS1810 switches.
How to interpret LED patterns to identify and diagnose problems.
Procedure to restore the switch to its original factory default configuration.
To Next Page
