1-3
Switch overview
Switch hardware
Network ports
■ Auto-sensing 10/100/1000BASE-T ports.
These ports support the “Auto-MDIX” feature, a feature that allows you to use
either straight-through or crossover twisted-pair cables to connect network
devices to the switch.
■ PoE PD port (PS1810-8G Switch only)
A network connection to the PoE PD port from a PoE PSE device can provide
power to the switch.
■ SFP slots for fiber or copper uplinks (PS1810-24G Switch only). SFPs support
the following network connectivity:
Optional Network Connectivity, Speeds, and Technologies
Speed Technology
Cabling
SFP Connector
1
100 Mb/s
100-FX Fiber (multimode) LC
1 Gbps
1000-T Copper (twisted-pair) RJ-45
1000-SX Fiber (multimode) LC
1000-LX Fiber (multimode or single mode) LC
1
To get information about the supported transceivers, see www.hp.com/networking/
support.
1. In the Auto Search textbox, type J4858 (for 100-Mb and Gigabit information).
2. Select one or more products that are displayed in the list. Click Display selected.
3. Click Product support information. The support page opens. In the support page, click
Manuals and find the Transceiver Support Matrix.
For technical details of cabling and technologies, see "Cabling and Technology Information"
in Appendix A.
To Next Page
Loading...
Need help?
General
