Need help?Do you have a question about the HP JH297A and is the answer not in the manual?
General| Product Number | JH297A |
|---|---|
| Manageable | Yes |
| Power over Ethernet (PoE) | Yes |
| PoE+ | Yes |
| PoE Budget | 740W |
| Switching Capacity | 176 Gbps |
| Jumbo Frame Support | Yes |
| Rack Mountable | Yes |
| Operating Temperature | 0 °C to 45 °C |
| Device Type | Switch |
| Ports | 48 |
| Power Supply | AC 100-240V |
| Operating Humidity | 10% to 90% non-condensing |
| MAC Address Table Size | 32768 entries |
Covers tasks like enabling IGMP snooping, setting version, and configuring port features.
Provides steps to enable IGMP snooping globally and for specific VLANs.
Explains how to configure an IGMP snooping querier.
Steps to enable IP multicast routing on the network or VPN instance.
Covers essential steps for basic IGMP configuration.
Provides instructions for configuring PIM-DM.
Details the configuration steps for PIM-SM.
Explains how to configure BIDIR-PIM.
Covers essential tasks for configuring MSDP.
Details essential steps for configuring MLD snooping.
Instructions for enabling MLD snooping globally and for VLANs.
Explains configuring static member and router ports.
Enables immediate port removal upon receiving a done message.
Describes how to configure an MLD snooping querier.
Details configuring IPv6 multicast group policies.
Enables filtering of IPv6 multicast source ports.
Provides instructions for configuring IPv6 PIM-DM.
Details the configuration steps for IPv6 PIM-SM.
To Next Page
