To Next Page

HP 5820X & 5800 Switch Series

Network Management and Monitoring

Configuration Guide

Abstract

This document describes the software features for the HP 5820X & 5800 Series products and guides

you through the software configuration procedures. These configuration guides also provide

configuration examples to help you apply software features to different network scenarios.

This documentation is intended for network planners, field technical support and servicing engineers,

and network administrators working with the HP 5820X & 5800 Series products.

Part number: 5998-1636

Software version: Release 1211

Document version: 6W101-20121123

Questions and Answers:

Need help?

Do you have a question about the HP 5820X Switch and is the answer not in the manual?

HP 5820X Switch Specifications

General

Form Factor	Rack-mountable
Power over Ethernet (PoE)	No
Flash Memory	512 MB
Redundant Power Supply	Optional
VLAN Support	Yes
Quality of Service (QoS)	Yes
IPv6 Support	Yes
Layer	3
Routing Protocol	BGP, IS-IS, OSPF, RIP, VRRP, PIM
Remote Management Protocol	SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, CLI, SSH
Features	Quality of Service (QoS), VLAN support, Access Control List (ACL), IPv6 support
Compliant Standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3z
Port Type	10/100/1000Base-T
Power Source	AC power supply
Security Features	Access Control List (ACL)
Layer Supported	L2/L3