HP 5820X Switch - Configuring the Member Devices; Enabling NDP; Enabling NTDP; Manually Collecting Topology Information

153
To do…
Use the command… Remarks
2. Enter cluster view.
cluster —
3. Remove a member device
from the cluster.
delete-member member-number
[ to-black-list ]
Required
Rebooting a member device
To do… Use the command… Remarks
1. Enter system view.
system-view —
2. Enter cluster view.
cluster —
3. Reboot a specified member
device.
Reboot member { member-number
| mac-address mac-address }
[ eraseflash ]
Required
Configuring the member devices
Enabling NDP
See Enabling NDP globally and for specific ports.
Enabling NTDP
See Enabling NTDP globally and for specific ports.
Manually collecting topology information
See Manually collecting topology information.
Enabling the cluster function
See Enabling the cluster function.
Deleting a member device from a cluster
To do… Use the command… Remarks
1. Enter system view.
system-view —
2. Enter cluster view.
cluster —
3. Delete a member device from
the cluster.
undo administrator-address Required