HP HPE 1820 Switch Series User Manual

HPE 1820 Switch Series Quick Start
Guide
The switch drawings in this document are for illustration only and may not match your particular switch
model.
For more detailed instructions and information to set up your switch, view or download the Installation
and Getting Started Guide for your switch at http://www.hpe.com/support/hpesc.
1. Unpack and check included parts.
• Documentation kit
• Switch
• Accessory kit (installation hardware)
• AC power cord for HPE 1820-24G, 1820-24G-POE+,
1820-48G and 1820-48G-POE switch models or DC external
power adapter for 1820-8G and 1820-8G-POE+ switch
models
2. Prepare for installation. To avoid personal injury or product damage, review the “Safety Precautions” (page 5)
3. Power on and verify that Self-Test completes normally. For the 1820-24G, 1820-24G-POE+, 1820-48G, and
1820-48G-POE+ switches, connect the power cord to the power connector at the back of the switch, and then into an
electrical outlet.
For the 1820-8G and 1820-8G-POE+ switches, connect the AC/DC adapter power cord to the power connector at the back
of the switch, and then plug the AC/DC power adapter into an electrical outlet.
*5900-4819*
© Copyright 2014, 2016 Hewlett Packard Enterprise Development LP
The information in this document is subject to change without notice.
Part Number: 5900-4819
Published: January 2016

HP HPE 1820 Switch Series Specifications

General

Brand	HP
Model	HPE 1820 Switch Series
Category	Network Router
Language	English

Summary

Quick Start Guide: Setup Steps

Unpack and Check Parts

Unpack the switch and verify all included parts are present.

Prepare for Installation

Review safety precautions before proceeding with the installation process.

Power On and Verify Self-Test

Connect power and ensure the switch's self-test completes normally.

Mount the Switch

Instructions for mounting the switch using rack, table, or wall methods.

Configure Switch Network Operation

Configure the switch for network operation using a PC and web browser.

Connect Network Cables

Connect the switch to the network using appropriate network cables.

Example: Initial Switch Configuration

Reconfigure PC IP and Subnet Mask

Adjust PC network settings to communicate with the switch.

Access Switch Web Interface

Log in to the switch's web interface using its default IP address.

Mini-GBIS/SFP Installation Notes

SFP Transceiver Usage Guidelines

Use only genuine HPE Mini-GBIC/SFP transceivers and ensure temperature compatibility.

Hot Swapping SFP Transceivers

Instructions and considerations for hot swapping SFP transceivers.

Safety Precautions

Installation Precautions

Important guidelines for safe installation to prevent instability, tilting, or falling.

Regulatory and Safety Information

Information on safety, environmental, and regulatory compliance for products.

1820 Switch Series Information - Regulatory and Safety

1820-8G External Power Adapter and Power Cords

Details on power adapters and cords for the 1820-8G switch model.

1820-24G, 1820-24G-PoE+, 1820-48G Power Cords

Power cord information for 1820-24G, 1820-24G-PoE+, and 1820-48G switch models.

1820-48G-PoE+ Power Cords

Power cord specifications for the 1820-48G-PoE+ switch model.