HP 5820X Switch - Displaying and Maintaining NQA; Configuring NQA Examples; Configuring ICMP Echo Test Example

33
Displaying and maintaining NQA
To do… Use the command… Remarks
Display history records of NQA
test groups
display nqa history [ admin-name operation-
tag ] [ | { begin | exclude | include }
regular-expression ]
Display the current monitoring
results of reaction entries
display nqa reaction counters [ admin-name
operation-tag [ item-number ] ] [ | { begin |
exclude | include } regular-expression ]
Display the results of the last
NQA test
display nqa result [ admin-name operation-
tag ] [ | { begin | exclude | include }
regular-expression ]
Display statistics of test results for
the specified or all test groups
display nqa statistics [ admin-name
operation-tag ] [ | { begin | exclude |
include } regular-expression ]
Display NQA server status
display nqa server status [ | { begin |
exclude | include } regular-expression ]
Available in any view
Configuring NQA examples
Configuring ICMP echo test example
Network requirements
As shown in Figure 7, configure NQA ICMP echo tests to test whether the NQA client (Device A) can
send packets through a specified next hop to a specified destination (Device B) and test the round-trip
time of the packets.
Figure 7 Network diagram for ICMP echo tests
NQA client
Device BDevice A
10.1.1.1/24 10.2.2.2/24
Device C
10.1.1.2/24
10.3.1.2/24
Device D
10.2.2.1/24
10.4.1.1/24
10.3.1.1/24
10.4.1.2/24