132
Displaying and maintaining CWMP
To do… Use the command… Remarks
Display the current configuration
information of CWMP
display cwmp configuration [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the current status
information of CWMP
display cwmp status [ | { begin |
exclude | include } regular-
expression ]
Available in any view
Configuring CWMP example
Before configuring the ACS server, make sure that the HP iMC BIMS software is installed on the server.
Along with software updates, the BIMS functions and web interface may change. If your web interface is
different from that in this example, see the user manual that came with your server.
Network requirements
A data center has two equipment rooms A and B. Both rooms require a great number of HP 5800
switches. There are ACS, DHCP, and DNS servers on the network. To improve deployment efficiency, use
CWMP to deliver different configuration files to the switches in rooms A and B. In this example, each
room has three HP 5800 switches.
Figure 47 Network diagram for CWMP
5800-1 5800-2 5800-3
Room A
5800-4 5800-5 5800-6
Room B
ACS
10.185.10.41
DHCP server
10.185.10.52
DNS server
10.185.10.60
Table 5 5800 switches deployed in two equipment rooms
Equipment room 5800 switch Serial ID
5800-1 210235AOLNH12000008 A
5800-2 210235AOLNH12000010
To Next Page
Loading...
