HP 5820X Switch - Outputting System Information to a Monitor Terminal

234
Outputting system information to a monitor terminal
System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the VTY user interface.
Outputting system information to a monitor terminal
To do… Use the command… Remarks
1. Enter system view.
system-view —
2. Enable information center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel channel-
number name channel-name
Optional.
See Table 9 for
default channel
names.
4. Configure the channel through
which system information can
be output to a monitor
terminal.
info-center monitor channel
{ channel-number | channel-
name }
Optional.
By default, system information is
output to the monitor terminal
through channel 1 (monitor).
5. Configure the output rules of
the system information.
info-center source { module-name
| default } channel { channel-
number | channel-name } [ debug
{ level severity | state state } * |
log { level severity | state state } *
| trap { level severity | state
state } * ] *
Optional.
See “Default output rules of
system informat
ion.”
6. Configure the format of the
time stamp.
info-center timestamp { debugging
| log | trap } { boot | date |
none }
Optional.
By default, the time stamp format
for log, trap and debugging
information is date.
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you must enable the associated
display function in order to display the output information on the monitor terminal.
To enable the display of system information on a monitor terminal:
To do… Use the command… Remarks
1. Enable the monitoring of
system information on a
monitor terminal.
terminal monitor
Required.
Enabled on the console and
disabled on the monitor terminal
by default.
2. Enable the display of
debugging information on a
monitor terminal.
terminal debugging
Required.
Disabled by default.
3. Enable the display of log
information on a monitor
terminal.
terminal logging
Optional.
Enabled by default.