Need help?Do you have a question about the HP MSR2003 and is the answer not in the manual?
General| Product Type | Router |
|---|---|
| Model | MSR2003 |
| Form Factor | Rack-mountable |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Network / Transport Protocol | TCP/IP, UDP/IP |
| Authentication Method | RADIUS, TACACS+ |
| Routing Protocol | RIP-1, RIP-2, BGP, OSPF, IS-IS |
| Remote Management Protocol | SNMP |
| Encryption Algorithm | AES, DES |
| Interfaces | 1 x console - RJ-45 |
| Power Supply | AC 100-240 V (50/60 Hz) |
| Operating Temperature | 0°C to 40°C |
Outlines required and optional tasks for configuring IGMP snooping functions and features.
Details tasks for enabling IGMP snooping globally and for VLANs, and specifying the version.
Lists required and optional tasks for enabling and configuring multicast routing.
Covers the process of enabling IP multicast routing before configuring other multicast features.
Lists required and optional tasks for PIM-DM configuration.
Steps to enable PIM-DM on interfaces and ensure PIM mode consistency.
Lists required and optional tasks for PIM-SM configuration, including RP and BSR setup.
Steps to enable PIM-SM, which is a prerequisite for PIM-SSM.
Lists tasks for enabling BIDIR-PIM, configuring RP, BSR, and common features.
Steps to enable BIDIR-PIM, requiring PIM-SM to be enabled first.
Lists required and optional tasks for IPv6 PIM-SSM.
Steps to enable IPv6 PIM-SM, prerequisite for IPv6 PIM-SSM.
Details configuring static RPs and C-RPs for IPv6 BIDIR-PIM.
To Next Page
