18
Ste
Command
Remarks
2. Enable IGMP snooping
globally and enter
IGMP-snooping view.
igmp-snooping By default, IGMP snooping is disabled.
3. Enable IGMP snooping for
specified VLANs.
enable vlan vlan-list
By default, IGMP snooping is disabled for a
VLAN.
To enable IGMP snooping for a VLAN in VLAN view:
Ste
Command
Remarks
4. Enter system view.
system-view
N/A
5. Enable IGMP snooping
globally and enter
IGMP-snooping view.
igmp-snooping
By default, IGMP snooping is
disabled.
6. Return to system view.
quit N/A
7. Enter VLAN view.
vlan vlan-id N/A
8. Enable IGMP snooping for the
VLAN.
igmp-snooping enable
By default, IGMP snooping is
disabled for a VLAN.
Specifying the IGMP snooping version
Different versions of IGMP snooping processes different versions of IGMP messages.
• IGMPv2 snooping processes IGMPv1 and IGMPv2 messages, but it floods IGMPv3 messages in
the VLAN instead of processing them.
• IGMPv3 snooping processes IGMPv1, IGMPv2, and IGMPv3 messages.
If you change IGMPv3 snooping to IGMPv2 snooping, the device does the following:
• Clears all IGMP snooping forwarding entries that are dynamically added.
• Keeps static IGMPv3 snooping forwarding entries (*, G).
• Clears static IGMPv3 snooping forwarding entries (S, G), which will be restored when IGMP
snooping is switched back to IGMPv3 snooping.
For more information about static IGMP snooping forwarding entries, see "Configuring static ports."
Y
o
u can specify the IGMP snooping version for a VLAN in IGMP-snooping view or in VLAN view. These
configurations have the same priority level.
To specify the IGMP snooping version for a VLAN in IGMP-snooping view:
Ste
Command
Remarks
9. Enter system view.
system-view N/A
10. Enable IGMP snooping globally
and enter IGMP-snooping view.
igmp-snooping N/A
11. Specify the IGMP snooping
version for the specified VLANs
version version-number vlan
vlan-list
The default setting is IGMPv2
snooping.
To Next Page
Loading...
Need help?
General
