157
To do… Use the command… Remarks
7. Configure the NM interface of
the management device.
nm-interface vlan-interface
interface-name
Optional.
CAUTION:
To isolate management protocol packets of a cluster from packets outside the cluster, configure the
device to prohibit packets from the management VLAN from passing the ports that connect the
management device with the devices outside the cluster and configure the NM interface for the
management device.
SNMP configuration synchronization function
SNMP configuration synchronization function facilitates management of a cluster, with which you can
perform SNMP-related configurations on the management device and synchronize them to the member
devices on the whitelist. This operation is equal to configuring multiple member devices at one time,
simplifying the configuration process.
To configure the SNMP configuration synchronization function:
To do… Use the command… Remarks
1. Enter system view.
system-view —
2. Enter cluster view.
cluster —
3. Configure the SNMP
community name shared by a
cluster.
cluster-snmp-agent community
{ read | write } community-name
[ mib-view view-name ]
Required.
4. Configure the SNMPv3 group
shared by a cluster.
cluster-snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view read-view ]
[ write-view write-view ] [ notify-
view notify-view ]
Required.
5. Create or update information
of the MIB view shared by a
cluster.
cluster-snmp-agent mib-view
included view-name oid-tree
Required.
By default, the name of the MIB
view shared by a cluster is
ViewDefault and a cluster can
access the ISO subtree.
6. Add a user for the SNMPv3
group shared by a cluster.
cluster-snmp-agent usm-user v3
user-name group-name
[ authentication-mode { md5 |
sha } auth-password ] [ privacy-
mode des56 priv-password ]
Required.
NOTE:
• The SNMP-related configurations are retained when a cluster is dismissed or the member devices are
removed from the whitelist.
• For more information about SNMP, see SNMP configuration in the
Network Management and
Monitoring Configuration Guide
.
To Next Page
Loading...
