HP J9833A

A-2
Specifications
Switch Specifications
Environmental
* The operating maximum altitude should not exceed that of any accessory that is connected
to any PS1810 Switch.
Acoustics
Power: 0 dB (no fans)
Safety
Complies with:
■ HP PS1810-8G
■ Standards: EN60950-1:2006+A11:2009+A1:2010+A12:2011 / IEC60950-
1:2005; Am 1:2009 CSA22.2 No. 60950-1-07 2nd; UL60950-1 2nd
■ HP PS1810-24G
■ Standards: EN60950-1:2006+A11:2009+A1:2010+A12:2011 / IEC60950-
1:2005; Am 1:2009 CSA22.2 No. 60950-1-07 2nd; UL60950-1 2nd
■ Lasers: EN 60825-1:2007 / IEC 60825-1:2007 Class 1; Class 1 Laser Products
/ Laser Klasse 1 (Use only supported HP SFPs)
Operating Non-Operating
Temperature 0C to 40C (32F to 104F) -40C to 70C (-40F to 158F)
Relative humidity
(non-condensing)
15% to 90% at 40C (104F) 15% to 90% at 65C (149F)
Maximum altitude 3.0 Km (10,000 ft)* 4.57 Km (15,000 ft)