HP 6200

Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143A
HP X131 10G X2 SC ER Transceiver J8438A
HP X131 10G X2 SC SR Transceiver J8436A
HP X131 10G X2 SC LR Transceiver J8437A
HP X131 10G X2 SC LRM Transceiver J9144A
Note 2 If this switch is factory installed in HP Universal Racks, Then the J9583A, J9583A#0D1 or J9583AZ is required.
AMS then J9583AZ is required.
EMEA then J9583A is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
System (std 0 // max=2) User Selection (min 0 / max=2) per Chassis
HP 10GbE 2-port SFP+/2-port CX4 yl Mod J9312A
min=0 \ max=2 SFP Transceivers See Configuration
Note:1
HP 10GbE 2-port X2 / 2-port CX4 yl Module J8694A
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
QuickSpecs
HP 6200 yl Switch Series
Configuration
DA - 12437 North America — Version 17 — December 9, 2013 Page 8