To Next Page

To Previous Page

4 Removal and replacement procedures

preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

●

Flat-bladed screwdriver

●

Magnetic screwdriver

●

Phillips P0 and P1 screwdrivers

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly

and assembly procedures.

NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying

screws) away from the work area to prevent damage.

Plastic parts

CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care

when handling the plastic

32 Chapter 4 Removal and replacement procedures preliminary requirements

Questions and Answers:

Need help?

Do you have a question about the HP 640 ProBook G3 Series and is the answer not in the manual?

HP 640 ProBook G3 Series Specifications

General

RAM	Up to 16 GB DDR4
Processor	Intel Core i3, i5, or i7 (6th Gen)
Display	14-inch HD or FHD
Graphics	Intel HD Graphics 520
Operating System	Windows 10 Pro
Ports	USB 3.0, USB 2.0, HDMI, VGA, Headphone/microphone combo jack
Wireless	Wi-Fi 802.11ac, Bluetooth 4.2
Battery	3-cell