3. Select the Paper Type/Quality pane.
4. In the Paper Type pull-down menu, click Automatic or Plain Paper.
5. Select the following print settings as appropriate:
– Print quality
– Paper source
6. Select any other print settings that you want, and then click Print.
Documents
Guidelines
● Save paper with two-sided printing.
● Do not exceed the In tray capacity: 150 sheets of paper.
Prepare to print
1. Verify that the printer is turned on.
2. Raise the Out tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-length
guide.
4. Place plain paper in the In tray, pushing the paper into the printer until it stops.
5. Slide the paper guides firmly against the paper.
1 Letter or A4 paper
2 Legal paper (extends over the edge of the In tray)
6. Lower the Out tray.
Do not extend the Out-tray extension stop when printing on legal paper.
User's guide 71
To Next Page
Loading...
