Technical Reference Guide www.hp.com 2-3
System Overview
Table 2-1 shows the differences in features between the different PC series based on form factor:
NOTES:
[1] 2nd serial port requires optional cable/bracket assembly.
[2] Low-profile, 25 W maximum.
[3] Low profile, 10-watt maximum
[4] Full-length;
75-watt maximum if PCIe x4 slot is not populated,
35-watt maximum if PCIe x4 slot is populated
[5] 35-watt maximum
[6] Half-height, half-length, 10-watt maximum
[7] 3.5” devices supported with adapters
[8] 2.5” solid state drives supprted with adapter brackets
[9] Can hold a 2nd hard drive
Table 2-1
Feature Differences by Form Factor
SFF CMT
Processor types supported Intel Core i5 Intel Core i5
Processor wattage (max) 95 W 95 W
Memory:
# & type of sockets
Maximum memory
4 DDR3 UDIMMs
16 G B
4 DDR3 UDIMMs
16 G B
Serial ports 1 std., 1 opt. [1] 1 std., 1 opt. [1]
Parallel ports optional optional
Drive bays:
Externally accessible
Internal
1 - 5.25”, 1 - 3.5” [9]
1 - 3.5”
3 - 5.25” [7]
3 - 5.25” [8]
Drive types supported 2 HDDs,
1ODD,
RAID1
2 HDDs,
2 ODDs,
RAID1
PCIe slots:
x16 (graphics)
x4 (x16 connector)
x1 connector
(all low profile)
1 [2]
1 [2]
1 [3]
(all full height)
1 [4]
1 [5]
1 [6]
PCI 2.3 32-bit 5-V slot, 25-watt maximum 1 3 full-height
Power Supply Unit:
Module type
power rating
internal
240-watt
internal
320-watt
To Next Page
Loading...
