Need help?Do you have a question about the HP dc7900 - Convertible Minitower PC and is the answer not in the manual?
General| Chipset | Intel Q45 Express |
|---|---|
| Memory | Up to 16 GB DDR2 SDRAM |
| Audio | Integrated High Definition Audio |
| Form Factor | Convertible Minitower |
| Processor | Intel Core 2 Duo, Core 2 Quad, Pentium Dual-Core |
| Storage | SATA Hard Drives |
| Graphics | Intel Graphics Media Accelerator 4500, optional discrete graphics |
| Optical Drive | DVD-ROM, DVD+/-RW |
| Network | Integrated Intel Gigabit Network Connection |
| Ports | USB 2.0, serial, parallel, audio in/out |
| Expansion Slots | PCI, PCIe x1, PCIe x16 |
| Operating System | Windows Vista, Windows 7 |
Describes the automatic installation process of the operating system.
Explains how to install drivers for optional hardware devices after OS installation.
Overview of the utility for viewing hardware configuration and running diagnostic tests.
Steps to access the HP Insight Diagnostics utility, including booting from a recovery disc.
Covers preinstalled software, unbundling, and methods for deploying custom software images.
Lists HP tools for managing and updating software on desktops, workstations, and notebooks.
Details characteristics and connector information for SATA hard drives.
Identifies and illustrates Convertible Minitower (CMT), Small Form Factor (SFF), and Ultra-Slim Desktop (USDT) chassis types.
Explains ESD, static generation, and precautions to prevent damage to electronic components.
Details equipment like wrist straps and heel straps to prevent static electricity damage.
Provides precautions for preventing static damage at the work area, including using dissipative materials.
Provides guidelines to prevent overheating and prolong computer life.
Covers general cleaning safety precautions and specific procedures for cleaning computer components.
Details memory socket population and configuration for SFF computers.
Specifies requirements for DDR2-SDRAM DIMMs used in SFF systems.
Illustrates and describes DIMM socket locations and population rules for SFF chassis.
Information on PCI and PCI Express expansion slots available in SFF computers.
Diagram and list of expansion slot locations on the SFF system board.
Procedures for removing, replacing, or adding expansion cards to SFF systems.
Guidelines for installing and removing various drive types in SFF computers.
General guidelines for installing and removing drives in SFF chassis.
Illustrates and describes drive bay locations for SFF computers.
Steps to remove the optical drive from SFF chassis.
Instructions for installing an optional 5.25-inch optical drive into SFF chassis bays.
Steps for removing and replacing the primary internal SATA hard drive in SFF chassis.
Steps for removing and installing the power supply in SFF chassis.
Initial safety procedures and steps to prepare the USDT computer for disassembly.
Describes security devices to prevent unauthorized access and secure USDT computers.
Instructions for installing cable locks, padlocks, and HP Business PC security locks on USDT chassis.
Steps for removing and installing the computer access panel on USDT chassis.
Instructions for removing and installing the front bezel on USDT chassis.
Information on installing DDR2-SDRAM SODIMMs into USDT system board sockets.
Guidelines for proper routing and handling of internal cables in USDT computers.
Information specific to 2.5-inch SATA internal hard drives in USDT chassis.
Steps for removing and installing the heatsink in USDT chassis.
Instructions for removing and installing the processor in USDT chassis.
Instructions for removing and installing the system board in USDT chassis.
Information on the computer's battery and replacement procedures for USDT chassis.
Instructions for replacing the battery in a Type 1 battery holder.
Instructions for replacing the battery in a Type 2 battery holder.
Instructions for replacing the battery in a Type 3 battery holder.
Lists POST error codes, messages, probable causes, and recommended actions.
To Next Page