HP 8642A - Page 248

Index
H~ ______________________________ ___
HELP, 3-167
Heterodyne band, 3-39, 3-200
Advantages, 3-40
Affects AM rates, 3-42
Affects
FM deviation, 3-40
Affects frequency sweep
span, 3-40
Affects <PM deviation, 3-40
How to select, 3-41
HI (annunciator), 3-98, 3-108, 3-122
HOLD, 3-143
HP-IB,3-5
8642A/B controller capabilities, 3-31
Abort, 3-31
Active function output, 3-18
Annunciators, 3-31
Available addresses, 3-8
Capabilities from
the local mode, 3-9
Capabilities, 3-9
Capability Reference Table, 3-10
Clear lockout, 3-26
Clear, 3-24
Clearing
status bits, 3-24
Codes, 3-32
Data entry notation, 3-14
Data Input Example, 3-11
Data Input, 3-11
Data Output, 3-15
DB
and DM, 3-76
Device Clear (DCL), 3-9
Display
current address, 3-8
Display indicators, 3-31
End of sweep, 3-28
ENT ADRS, 3-8, 3-34
Entering a user-defined message, 3-202
Entry notation, 3-14
Error code recovery, 3-16
Error, 3-28
Execution Errors, 3-16
Front-panel keys, 3-34
Go To Local (GTL), 3-25
Hardware
Errors, 3-16
HI, LO status, 3-20
Input syntax, 3-11
INT (RQS MASK), 3-34
Listen address status, 3-9
Listen only, 3-8
Local lockout,
set local, 3-26
Local to remote, 3-25
LOCAL, 3-25, 3-34
Local/remote, 3-28
LSTN,3-11
MANUAL sweep, 3-64, 3-92
Message recovery, 3-23
Messages affected by
instrument preset, 3-138
Messages affected by
partial preset, 3-139
Messages, 3-16, 3-16
Modulation switching time, 3-132
OA,3-18
OC, 3-16
3-210
HP-IB (continued)
OE,3-16
OH, 3-16
OL,3-20
Output active function, 3-18
Output display information, 3-21
Output Execution Errors, 3-16
Output Hardware Errors, 3-16
Output HI,LO status, 3-20
Output level switching time, 3-73
Output messages, 3-16
Output modulation source, 3-22
Model 864 2A/B
Output Parameters Changed Messages, 3-16
Output special functions, 3-22
Parameters Changed Messages, 3-16
Program codes, 3-32
Ready, 3-28
Remote
to local, 3-25
Require Service, 3-27
Reset
status bits, 3-24, 3-30
RMT,3-8
RQS mask affected by instrument preset, 3 -138
RQS mask affected by partial preset, 3-139
RQS MASK, 3-27, 3-34
Selected Device Clear (SDC), 3-9
Sequence dependency, 3-12
Serial Poll Enahle
(SPE), 3-29
Service request, 3-27
Set address, 3-8
Set local, 3-26
SHIFT key, 3-11
Special functions, 3-169
SRQ,3-27
Status bit clearing, 3-24, 3-30
Status bit, 3-31
Status byte affected by instrument preset, 3-138
Status byte affected by partial preset, 3-139
Status byte clearing, 3-27, 3-29
Status byte, 3-29
Talk address status, 3-9
TLK,3-15
Trigger, 3-31
HZ, 3-208
INCR SET, 3-149
INCR,3-142
Increment set, 3-149
Input data, 3-9
INSTR PRESET, 3-138
Instrument preset, partial preset, 3-137
Internal source (see modulation oscillator), 3-131
INT
K
AM,3-98
FM,3-107
<PM, 3-120
Pulse Modulation, 3-127
Key functions, 3-35
Knob hold, 3-143