HP 8642A

Model 8642A/B
Performance Tests
PERFORMANCE TESTS
I b. Calibration
Perform the Level Accuracy Performance Test at the following
frequencies:
3, la, 100, 500, 1000 (and 1300 MHz for 8642B), and
levels: a, -40, -80 dBm. (If the measuring receiver is an HP 8902,
store calibration values when
instructed by notes 2 -7 in 4-5 tables.)
2. Harrnonics/Su b- Harmonic
Set
the HP 8642 amplitude and frequency to the values in the
following table. Set the measuring receiver to the frequencies in the
third column. Verify the level is below the specified minimum.
HP 8642 HP 8642 Harmonic!
Results
AMPTD
FREQ
Sub-Harmonic
(dBm) (MHz) (MHz)
Min. Actual
+14.0 1.000000
3.0
2
2S.12E-06
+14.0 1.S00000
3.0
2
2S.12E-06
+14.0 166.666667
SOO.05
2S.12E-06
+14.0 2S0.000000 SOO.O
2S.12E-06
+10.0 2000.000000
1000.0
6
316.2E-09
+14.0
SOO.OOOOOO 1000.0
2S.12E-06
+14.0 333.333333
1000.0
2S.12E-06
2. 3, 5, 60
n
the HP
8902A Measuring Receiver, press blue SHIFT, RECALL, followed by the
numeric key Indicated by this note.
4-13