Regulatory Information (Updated March
1999)
To
prevent electrical shock, disconnect instrument
from
mains (line)
before cleaning. Use a dry cloth or one slightly dampened with water
to
clean the external case parts.
Do
not attempt
to
clean internally.
Ventilation Requirements: When installing the product in a cabinet,
the convection into and out of the product must not be restricted.
The ambient temperature (outside the cabinet) must be less than the
maximum operating temperature of the product by
4"
C
for
every
100
watts dissipated in the cabinet.
If
the total power dissipated in the
cabinet is greater than
800
watts, then forced convection must be
used.
Product
Markings
CE
-
the CE mark
is
a
registered trademark
of
the European Community.
A
CE mark
accompanied by a year indicated the year the design was proven.
CSA
-
the
CSA
mark
is
a registered trademark
of
the Canadian Standards Association.
4
Chapter
1
To Next Page
Loading...
Need help?
General
