Introduction
116
Introduction
Each procedure may contain the following information:
• A brief measurement overview and a reference to applicable TIA/EIA spec-
ifications for each test.
• A list of the Test Set options and additional test equipment required to per-
form the procedure.
• Any special test considerations that need to be considered for safety, mea-
surement accuracy, etc.
• Step by step procedures required to perform each measurement (with illus-
trations).
Refer to "Configuring for Measurements" on page 243, or the Test Set’s
User Guide on preparing the Test Set for operation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
