HP 8920A - Page 493

493
Chapter 8, Programming The Call Processing Subsystem
CALL DATA Screen Message Field Descriptions
F
This field displays the first word indication received from the mobile station.
• A ‘1’ indicates that this is the first word.
• A ‘0’ is displayed for all subsequent words.
NAWC
This field displays the number of additional words coming from the mobile station.
T
This field displays the message type received from the mobile station.
• Set to ‘1’ to identify the message as an origination or an order.
• Set to ‘0’ to identify the message as an order response or page response.
S
This field displays whether the serial number word is received from the mobile station.
• Set to ‘1’ if the serial number word is sent.
• Set to ‘0’ if the serial number word is not sent.
E
This field displays the extended address word received from the mobile.
• Set to ‘1’ if the extended address word is sent.
• Set to ‘0’ if the extended address word is not sent.