534
Chapter 8, Programming The Call Processing Subsystem
Programming The ANALOG MEAS Screen
Programming The ANALOG MEAS Screen
Figure 56 The ANALOG MEAS Screen
The ANALOG MEAS screen is used to make RF and audio measurements on the
mobile station connected to the Test Set while on an active voice channel.
Refer to Chapter 6, “Call Processing Subsystem”, in the HP 8920 User’s Guide
for detailed information on the operation and manual use of the
ANALOG MEAS
screen. The information presented in this section covers the
ANALOG MEAS screen
programming commands and how to use them.
To Next Page
Loading...
