HP 9015 User Manual

5. To remove the compact stand, lay the RP9 face down on a at surface covered by a soft clean cloth. Push
up the release latch on the rear of the display head (1), tilt the stand back (2), and then lift up from the
display (3).
6. To mount the display head to a wall or swing arm, use the 100 mm x 100 mm VESA mounting holes on
the rear of the display head.
Removing and attaching the ergonomic and compact stands 7

HP 9015 Specifications

General

Model	HP 9015
RAM	8GB DDR4 (varies by configuration)
Storage	256GB SSD
Graphics	Intel UHD Graphics
Ports	HDMI
Wireless	Bluetooth 5.0