To Next Page

To Previous Page

5. Remove the two screws that secure the top port cover (1), and then pull the port cover o the display

head (2).

NOTE: You may need to gently loosen the port cover from inside of the screw holes with a at

screwdriver.

6. Align the tabs on the rear cover with the slots on the display head while placing the cover on the display

head, and then slide the cover down so that it snaps in place.

Installing a 2 x 20 LCD or 7” LCD customer facing display (CFD) 19

Questions and Answers:

Need help?

Do you have a question about the HP 9015 and is the answer not in the manual?

HP 9015 Specifications

General

Model	HP 9015
RAM	8GB DDR4 (varies by configuration)
Storage	256GB SSD
Graphics	Intel UHD Graphics
Ports	HDMI
Wireless	Bluetooth 5.0