To Next Page

To Previous Page

5. Slide the CFD bracket onto the underside of the base (1), and then secure the bracket with the screw (2).

6. Route the CFD cable up through the center hole in the base and connect it to a USB port on the rear I/O.

7. Reconnect the power cord and press the power button.

Installing a 2 x 20 LCD or 7” LCD customer facing display (CFD) 21

Questions and Answers:

Need help?

Do you have a question about the HP 9015 and is the answer not in the manual?

HP 9015 Specifications

General

Model	HP 9015
RAM	8GB DDR4 (varies by configuration)
Storage	256GB SSD
Graphics	Intel UHD Graphics
Ports	HDMI
Wireless	Bluetooth 5.0