HP 9015 User Manual

5. Use the nger slots on the rear metal shield to pull the top of the shield up, and then lift the shield o
the display head.
6. To release the battery from its holder, squeeze the metal clamp that extends above one edge of the
battery. When the battery pops up, lift it out (1).
7. To insert the new battery, slide one edge of the replacement battery under the lip of the holder with the
positive side up. Push the other edge down until the clamp snaps over the other edge of the battery (2).
Replacing the battery 35

HP 9015 Specifications

General

Model	HP 9015
RAM	8GB DDR4 (varies by configuration)
Storage	256GB SSD
Graphics	Intel UHD Graphics
Ports	HDMI
Wireless	Bluetooth 5.0