Need help?Do you have a question about the HP BL460c - ProLiant - G5 and is the answer not in the manual?
General| Form Factor | Blade |
|---|---|
| CPU | Up to two Dual-Core or Quad-Core Intel Xeon 5400 series processors |
| Memory Type | PC2-5300 Fully Buffered DIMMs (DDR2-667) or PC2-6400 Fully Buffered DIMMs (DDR2-800) |
| Hard Drive | SAS or SATA |
| RAID Controller | Integrated HP Smart Array P400i with 256MB cache |
| Network Controller | Two embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine |
| Remote Management | Integrated Lights-Out 2 (iLO 2) |
Explains warranty service that provides replacement parts free of charge, with CSR replacement being mandatory.
Details the various components of the server blade for identification and replacement purposes.
Lists essential tools needed for performing maintenance and replacement procedures on the server blade.
Outlines critical safety precautions, including ESD prevention and warnings for handling hot components.
Explains various hazard symbols found on the equipment and their associated safety warnings.
Describes the necessary steps to prepare the server blade before servicing internal components.
Provides instructions on how to safely shut down the server blade before performing maintenance.
Details the procedure for physically removing the server blade from its enclosure.
Instructions for removing and replacing the server blade's access panel for component servicing.
Procedure for removing and replacing a hard drive blank in the server blade.
Step-by-step guide for removing and installing hard drives in the server blade.
Instructions for removing and installing Fully Buffered DIMMs (FBDIMMs) on the server blade.
Procedure for removing and installing the hard drive backplane assembly.
Steps to remove and install the retainer for the hard drive backplane.
Guide for removing and replacing the front panel and hard drive cage assembly.
Instructions for removing and installing optional mezzanine cards for network connectivity.
Procedure for removing and replacing the cache module for the Smart Array E200i controller.
Steps for removing and installing the battery pack for the Smart Array E200i controller.
Instructions for removing and installing the server blade's handle.
Procedure for removing and replacing the server blade's release button.
Guide for removing and installing the heatsink assembly on the processor.
Detailed instructions for removing and installing the server blade's processor.
Steps for removing and installing the server blade's system board.
Procedure for replacing the system battery that powers the real-time clock.
Lists available troubleshooting guides and resources for resolving server issues.
Information on HP's proactive server blade management and diagnostic tool.
Details the survey functionality of HP Insight Diagnostics for gathering system information.
Explains the Integrated Management Log (IML) for viewing system events and logs.
Information about the Array Diagnostics Utility for storage and disk drive analysis.
Overview of HP SIM for system administration and device management.
Description of ISEE, a remote monitoring and diagnostic tool for system management.
Information on WEBES for proactive hardware event management and analysis.
Details OSEM, a tool for filtering, analyzing, and notifying service events.
Identifies and labels the components located on the front panel of the server blade.
Explains the status and meaning of the LEDs on the server blade's front panel.
Describes the LEDs on SAS and SATA hard drives and their combinations.
Provides a table interpreting the combinations of SAS and SATA hard drive LEDs.
Identifies and labels the various components on the server blade's system board.
Defines the types and capabilities of mezzanine connectors on the system board.
Illustrates the numbering and organization of FBDIMM slots on the system board.
Describes the functions and default settings of the system maintenance switch.
Identifies components related to the hard drive backplane.
Details the connectors and purpose of the HP c-Class Blade SUV Cable.
Lists operating, shipping, and storage environmental parameters for the server blade.
Provides physical dimensions and weight specifications for the server blade.
To Next Page