Need help?Do you have a question about the HP ML350 - ProLiant - G6 and is the answer not in the manual?
General| Product Line | ProLiant |
|---|---|
| Model | ML350 G6 |
| Server Type | Tower |
| Processor Cores | Quad-Core or Six-Core |
| Chipset | Intel 5520 |
| Memory Type | DDR3 |
| Maximum Memory | 192 GB |
| Memory Slots | 18 DIMM slots |
| Storage Controller | Smart Array P410i |
| Hard Drive Interface | SAS/SATA |
| RAID Support | Yes |
| Expansion Slots | 6 PCIe slots |
| Processor | Intel Xeon 5500 series |
| Storage | Up to 16 SFF or 8 LFF drives |
| RAID Levels | 0, 1, 5, 6, 10, 50 |
| Network Controller | NC382i Dual Port Gigabit |
| Power Supply | 460W, 750W, or 1200W |
| Form Factor | Tower |
| Operating System Support | Windows, Linux, VMware |
Explains HP's limited warranty service where replacement parts are provided at no cost.
Details server mechanical parts, their part numbers, and customer self-repair status.
Lists and identifies server system components, part numbers, and self-repair status.
Covers tools, preparation, extending server, powering down, rack removal, and safety.
Instructions for replacing front bezel, tower foot, access panel, and rack bezel.
Procedures for replacing fan baffles, blanks, fans, and power supply blanks.
Steps for replacing SAS blanks, drives, and hard drive cages.
Covers replacement of expansion slots, boards, media bays, cache modules, and PCI-X cages.
Instructions for installing media devices, DIMMs, heatsinks, and processors.
Procedures for replacing the system board, power backplane, and battery.
Information on the non-customer-removable Trusted Platform Module (TPM).
Lists guides, HP Insight Diagnostics, and RBSU for system analysis and troubleshooting.
Details survey functionality, IML, and ADU for system information and diagnostics.
Overview of remote support and server migration software solutions.
Identifies front panel components, LEDs, and buttons on the server.
Identifies rear panel components, connectors, LEDs, and buttons.
Details system board components, LEDs, and maintenance switch functions.
Guides for identifying DIMMs, NMI functionality, SAS/SATA device numbers, and drive LEDs.
Details fan locations, configurations, and hard drive cage jumper settings.
Lists environmental, mechanical, and power supply specifications for the server.
Defines common acronyms and abbreviations used throughout the manual.
An alphabetical index of topics and their corresponding page numbers for quick reference.
To Next Page
