9. Click Next. The IP Address to Exclude dialog box appears.
a. In the Exclude field, enter a beginning IP address.
b. In the To field, enter an ending IP address. All IP addresses that fall between the beginning and
ending IP addresses do not have login access.
c. Click Add. The IP address or IP address range is added to the Exclusion list. To delete an IP
address or IP address range, select an IP address or IP address range, and click Delete. The IP
address or IP address range is deleted from the Exclusion list.
Note: If you enter an invalid IP address or IP address range, an error message appears indicating
the IP address is invalid. Click OK. Enter a valid IP address or IP address range, and click Add
again.
Note: If you select Next without adding any IP addresses to either the Include or Exclude lists, a
warning message appears stating, IP Restricted Login checkbox will be marked
as disabled. Do you want to proceed without adding any IP Address
restrictions? If you select OK, the IP Restricted Login option on the IP Restricted Login
dialog box is cleared, and the Install Summary dialog box appears.
10. Click Next. The Install Summary Panel appears. The Install Summary Panel lists a summary of the
options that you specified during the installation.
30 Installing HP SMH on a Windows operating system
To Next Page
Loading...
