TAG 801: Prints Light or Light With Carrier Particles
3-156 Troubleshooting Analysis Guide (TAGs) June 1999
26
Turn the printer off and unplug the power cord.
• Replace the printhead assembly unit.
• Power-on-reset the printer.
• Run test prints.
Has the problem been resolved?
No: Reinstall the original printhead assembly unit and continue.
Yes: Turn to TAG 002: Check & Problem Resolution.
27
Turn the printer off and unplug the power cord.
• Replace the IGS board.
• Power-on-reset the printer.
• Run test prints.
Has the problem been resolved?
No: Reinstall the original IGS board and go to TAG 800: Prints Blank or With Dark Horizon-
tal Bands.
Yes: Turn to TAG 002: Check & Problem Resolution.
To Next Page
Loading...